BCGJY - C-863-66 POLYAMIDE CONVERTER
- MSDS: BCGJY
- Manufacturer: KOPPERS CO INC
- Product Name: C-863-66 POLYAMIDE CONVERTER
- National Stock Number: 8010-00N000819
Product Identification
Product ID:C-863-66 POLYAMIDE CONVERTER
MSDS Date:01/01/1985
FSC:8010
NIIN:00N000819
MSDS Number: BCGJY
Responsible Party
PITTSBURGH, PA 15219-1818
US
Cage: GO941
Contractor
Telephone: 800-456-7566
Cage: GO941
Ingredients
2-ETHOXYETHANOL (EGEE) (SARA III)
CAS: 110-80-5
RTECS: KK8050000
OSHA PEL S,200 PPM
ACGIH TLV: S, 5 PPM; 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
N-BUTYL ALCOHOL (SARA III)
CAS: 71-36-3
RTECS: EO1400000
OSHA PEL 100 PPM
ACGIH TLV: S, C 50 PPM; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ISOPROPYL ALCOHOL (SARA III)
CAS: 67-63-0
RTECS: NT8050000
OSHA PEL 400 PPM/500 STEL
ACGIH TLV: 400 PPM/500STEL;9192
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Effects of Overexposure:APPROX 50PPM IRRIT HUMAN ORGAN.HIGH CONC CAUSE
DROWS & DIZZ FOLLOWED BY COMA;DEATH FM EXPLOS OR BRTH
First Aid
First Aid:INH:MOVE TO FRESH AIR.RESTORE BREATHING.CALL DR. SKIN:WASH
W/SOAP & WATER. EYES:FLUSH W/WATER FOR 15 MIN & CALL DR.WASH
CONTAMINATED CLOTHES BEFORE REUSE.INGEST:CALL DR. DO NOT INDUCE
VOMIT.
Fire Fighting
Flash Point:53F OR 11.5C TCC
Extinguishing Media:FOAM,DRY CHEM,WATER SPRAY FOG OR CO*2.
Fire Fighting Procedures:USE O*2 BRTHING APPARAT.COOL EXPOSED
CONTAINERS W/WATER.
Unusual Fire/Explosion Hazard:KEEP AWAY FROM HEAT,SPARKS & FLAME.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION.AVOID BRTHNG
VAPORS.VENTILATE AREA.CONTAIN & SCOOP UP SPILL W/NON-SPARKING
TOOLS,RAGS,ETC.USE INERT ABSORBENT MATERIAL ON SMALL SPILLS OR ON
RESIDUALS OR LARGE SPILLS.
Handling
Handling and Storage Precautions:KEEP CONTAINER CLSD & UPRIGHT TO
PREVENT LEAKAGE.AVOID SOURCES OF IGNITION & BREATHING VAP OR
SPRAY.AVOID EYE AND SKIN CONTACT.
Other Precautions:MAINTAIN GOOD PERSONAL HYGIENE.DO NOT USE IN CONFINED
AREAS,TANKS,OR PITS WITHOUT ADEQUATE VENTILATIONS.
Exposure Controls
Respiratory Protection:W/ADEQ O*2 & VAP CONC <2% USE ORGANIC VAP CNSTR
OR AIR SUPP MASK.
Ventilation:LOCAL OR MECHANICAL EXHAUST
Protective Gloves:RUBBER
Eye Protection:SAFETY GOGGLES
Supplemental Safety and Health
ADDRESS:KOPPERS BLDG. PITTSBURGH,PA. 15219
Chemical Properties
Vapor Density:>1.0
Evaporation Rate & Reference:>N-BUT ACET
Solubility in Water:SLIGHTLY
Appearance and Odor:CLEAR LIQ W/TYPICAL SOLVENT ODOR.
Percent Volatiles by Volume:85
Stability
Stability Indicator/Materials to Avoid:YES
Disposal
Waste Disposal Methods:DISPOSE IAW FEDERAL,STATE, & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.